Add to Cart
OEM 3/5/12 Lead Temperature Respiration ECG Module for Patient Monitor
| Adopting digital filter technology |
| Selectable 50Hz or 60Hz band stop filter |
| 500Hz,7 /12 lead synchronous sample and analysis |
| Character Classification Up to twelve sort, and 3-channel ST Segment Monitoring |
| Anti high-frequency electric-knife |
| Adopting single 5V power supply,low consumption and safely insulation |
| 5V TTL Communication |
| 2-channel temperature detect ,and two sort of sensor model |
| Detecting respiration by impedance between RA-LL |
| 8-channel ECG waveform |
| ST Segment Analysis |
| Heat rate calculation |
| Arrhythmia analysis |
| Lead off status indication |
| Lead mode | 12 leads (R, L, F, N, C1~C6 or RA, LA, LL, RL, V1~V6 ) |
| Selection | I, II, III, aVR, aVL, aVF, Vx, CAL |
| Gain | ´0.25V/mV, ´0.5V/mV, ´1V/mV, ´2V/mV |
| Heart rate(HR) | Range: Adult 15 ~ 300 bpm Neo/Ped 15 ~ 350 bpm Accuracy: ±1% or ±1bpm Sensitivity: > 200 uVpp |
| Differential Input Impedance | > 5 MΩ |
| CMRR | > 100 dB |
| Electrode offset potential | ±400mV |
| Insulation Intensity | 4000VACrms |
| Baseline Recovery | < 3 s, after Defi. |
| ECG Signal Range | >±5 mVpp |
| Bandwidth | Diagnostic 0.05 ~ 100 Hz Monitor 0.5 ~ 40 Hz Surgery 1 ~ 20 Hz Strong filter 5 ~ 20Hz |
| Calibration Signal | 1mVpp,Accuracy ±3% |
| ST segment monitoring range | -2.0mV ~2.0mV |
| Arrhythmia analysis | ASY,VF/VTA,CPT,RUN,BGM,TGM,R on T(ROT),VPB,TAC,BRD,MIS,PNC,PNP |
| Waveform | 1 ch |
| Respiration Rate | dult 7-120bpm Ped and Neo 7-150bpm Resolution 1bpm Accuracy ±2bpm |
| Suffocation alarm | 10-40s Gain 10levels |
| Baseline Impedance | 500 - 4000Ω |
| Measuring Range | 0.5 - 5Ω |
| Channel Number | 2 ch |
| Probe type | 2K and 10K probe |
| Range | 0-50°C |
| Resolution | 0.1°C |
| Accuracy | ±0.1°C |



